Materials for Glass Fiber Reinforced Concrete Countertops

Showing 1–10 of 16 results

TRINIC GFRC ADMIX

$52.00$2,400.00

Trinic GFRC Admix – Multi Component Admixture

Multi component powdered admixture for the production of ultra high performance GFRC, RPC, and ECC Concrete

WHITE SILICA FUME

$45.00$1,300.00

White Silica Fume – the Ultimate Pozzolan

Trinic is pleased to offer white silica fume for the production of high performance decorative concrete. We have thoroughly evaluated the performance of this product and found it superior to other pozzolans as well as other silica fume products.

White Silica Fume improves the properties of both fresh and hardened concrete.

The most important property is the permeability, Lower the ingress of movement of water or chemicals; lower the adverse reactions such as sulfate attack,
The reaction between silica fume and the calcium hydroxide, released as the cement hydrates, provides a dense impermeable pore structure.

Improve the mechanical performances of concrete.

The Silica fume reacts with the cement paste to form additional strong Calcium Silicate Hydrate (CSH) providing higher strength.
Silica fume reduces bleeding and enhances the cement paste bond to the aggregates. Thanks to its pozzolanic effect (reaction with Ca(OH)2 ), and therefore to the strength improvement.

Recommended Dosage: Replace 5% to 10% of your Portland Cement

3/4″ AR GLASS FIBER

$60.00

Owens Corning Glass Fiber – 3/4″ Bundled fiber for GFRC backcoats.

Advantages:
Type of Glass: Alkali Resistant, high Zirconia Content
Highest Integrity During Mixing, Best Flow Characteristics

1/2″ AR GLASS FIBER

$87.00

Owens Corning Glass Fiber -1/2″ Bundled fiber for GFRC backcoats.

Advantages:
Type of Glass: Alkali Resistant, high Zirconia Content
Highest Integrity During Mixing, Best Flow Characteristics

TRINIC STAGE II BLENDED POWDER HARDENER / ACCELERATOR

$48.00$1,300.00

Trinic Stage II Blended Powder Hardener / Accelerator

  • Blended powder hardener / accelerator admixture formulated specifically for the production of high performance thin section concrete.
  • Increases the early strength and ultimate strength of concrete
  • Offsets the retarding effects of high Plastisicer dosages while reducing pozzolan strength lag
  • Delivers excellent results in normal and cool conditions where very high next day strengths are required.
  • Curing times and heat requirements are significantly reduced while concrete quality is improved.
  • Does not contain calcium chloride or any other intentionally added chlorides and will not initiate or promote the corrosion of reinforcing steel
  • Less chance of warpage, curling, or cracking
  • A must for winter concrete
  • Increase strength gains as much as 50% overnight.
  • Designed to work with Trinic’s GFRC Admix